Erasing Disc Title/Station Title
1 Press TITLE 
to select the Title Display. Then,
press again and hold for at least 2 seconds.
• For details, see asterisk 2 of “Displaying the Title/Text” (page 20).
2 Press and hold
3 Press gor frepeatedly until the title you want to erase is displayed.
4 Press and hold
5 Press TITLE 
to cancel the title erasing mode.
•You cannot erase
•"NO DATA" is displayed for 2 seconds if the title is not input in step 2, or if all titles are erased in step 4.
Displaying Time
Press TITLE 
repeatedly until the time is displayed.
Each press changes the display.
For details, see “Displaying the Title/Text” (page 20).
•Selecting any tuner or CD function while in the clock priority mode will interrupt the time display momentarily. The function selected will be displayed for about 5 seconds before the time returns to the display.
•When the power is off but the ignition key is on, press TITLE 
to display the time.
Blackout Mode On and Off
When Blackout mode is turned on, the display will turn off to reduce power consumption. This additional power enhances the sound quality.
Press and hold DISP/B.OUT for at least 2 seconds to activate the blackout mode.
The display will turn off.
•If any button on the unit is pressed during the blackout mode, the function will be displayed for 5 seconds to show the operation before returning to Blackout mode.
To cancel Blackout mode, press and hold DISP/B.OUT for at least 2 seconds.
Setting an Amplifier Link
With an external Amplifier Link compatible amplifier
1 Press and hold MENU for at least 2 seconds.
2 Press MENU to select
3 Press gor fto select
BASS VOLUME.
To set the BASS VOLUME
4 Turn the Rotary encoder to adjust the level.
5 When the adjustment has been completed, press MENU to select RETURN.
The unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will return to normal mode.
To set the Amplifier
4 Press BAND/TEL. to select from the following setting items to be adjusted.
INPUT → LOW PASS → SUBSONIC →
→TCR → PHASE → TURN ON DELAY→ OUTPUT DISABLE (SAFE) → INPUT
5 Turn the Rotary encoder to change the settings.
6 Press the Rotary encoder if there are other settings to be changed.
Repeat steps 5 and 6 (above).
7 Repeat steps 4 to 6 (above) if other items need to be adjusted.
To set another amplifier, return to the step 3.
To store the adjusted contents
1) While adjusting the mode, press either button (1 or 2) for at least 2 seconds.
The adjusted contents are stored.
To recall adjusted and stored contents
1)While adjusting the mode, press either button (1 or 2). The adjusted and stored contents are recalled.
8 When adjustment has been completed, press MENU to select RETURN.
The unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will return to normal mode.
To easily recall adjusted and stored contents
1)Press MENU to select
2)Press gor fto select AMP 1 to 8.
3)Turn the Rotary encoder to select Preset 1 or Preset 2.
4)Press MENU to select RETURN. The unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will return to normal mode.
•For details of each of the settings, refer to the Owner's Manual of the external amplifier.
•If amplifier settings are made on the unit, do not then change the setting with the amplifier buttons as the amplifier display may not match the operations of the unit.
•"No Link" is displayed if the amplifier is removed or its power cannot be turned on, etc.
•If multiple amplifiers are connected to this unit, set a different ID on each amplifier. Otherwise the display may flicker.
