Alpine CDA-9833 owner manual XM Radio Optional, 27-EN

Connecting to an External Amplifier

POWER-IC ON (Initial setting) / POWER-IC OFF

When an external amplifier is connected, sound quality can be improved by stopping the power supply of the built-in amplifier.

POWER-IC OFF : Use this mode when the front and rear pre- amplifier of the unit are used to drive an external amplifier connected to the speakers. In this setting, the head unit’s internal amplifier has no output to drive speakers.

Front

XM Radio (Optional)

SOURCE/ BAND/

POWER TEL. TITLE 8 SEARCH

Amplifier

left

Front

right

Rear

left

Amplifier

Rear right

POWER-IC ON : The speakers are driven by the built-in amplifier.

Speakers

SPEAKER

RIGHT FRONTFront right

SPEAKER

RIGHT REARRear right

SPEAKER

LEFT REARRear left

SPEAKER

LEFT FRONTFront left

•No sound is produced by the system when the power output is set to OFF.

Setting the Temperature Display for the

External Amplifier

TEMP °F (Initial setting) / °C

When a separately sold Amplifier Link compatible amplifier is connected, you can set how to display its temperature. You can switch the setting between Fahrenheit and Celsius.

°F : The temperature is displayed in Fahrenheit.

°C : The temperature is displayed in Celsius.

Setting the Tone Defeat for External Devices

INT AUDIO ON / INT AUDIO OFF (Initial setting)

When inputting external devices to this unit, turning tone defeat on will bypass EQ and MX, i.e., sound for external devices is output at the default setting.

gMENU f Rotary 9	Preset buttons
encoder	(1 through 6)

Receiving XM Channels with the XM Receiver (Optional)

XM Satellite Radio* is the next generation of audio entertainment, with up to 100 brand-new digital channels. For a small monthly fee, subscribers can hear crystal-clear music, sports, news and talk, coast- to-coast via satellite. For more information, visit XM’s website at www.xmradio.com or call 1-800-852-9696.

An optional XM Satellite Radio Receiver (TUA-T020XM) and an optional XM antenna may be connected to the CDA-9835/CDA-9833. With an XM Receiver connected to the Ai-NET input of the CDA- 9835/CDA-9833, the XM Receiver will be controllable from the CDA-9835/CDA-9833.

*XM and its corresponding logos are trademarks of XM Satellite Radio Inc.

•The controls on the CDA-9835/CDA-9833 for XM Receiver operation are operative only when an XM Receiver is connected.

•The XM1, XM2 or XM3 band illuminates when in XM mode.

1 Press SOURCE/POWER to select XM mode.

2 Press BAND/TEL. to select XM1, XM2 or XM3.

Each press changes the band:

XM1 → XM2 → XM3 → XM1

3 Press 8 or 9 to select desired category.

Holding down 8 or 9 will change categories continuously.

4 Press gor fto select the desired channel.

Holding down gor fwill change channels continuously.

•When using the optional remote control (RUE-4190), an XM Channel can be directly called up with the numeric keypad of the remote control.

1While in XM Radio mode, enter the Channel number you want to call up with the numeric keypad on the remote control.

2Press ENTER or + 10/OK on the remote control within 5 seconds to receive the XM Channel.

If the channel number is 3 digits, the XM Channel is automatically received after the channel number is input.

27-EN