Alpine IVA-C800 owner manual Turning Power On or Off, Some of this units functions, cannot be

English

	Basic Operation
1 2	Turning Power On or Off
	Some of this unit's functions, cannot be

performed while the vehicle is in motion. Be sure to stop your vehicle in a safe location and apply the parking brake, before attempting these operations.

1

2

Press the PWR (Power) button to turn on the unit.

The opening screen appears automatically.

Note: The unit can be turned on by pressing any button on the unit except the MUTE,

OPEN/CLOSE and (ANGLE) buttons.

Press the PWR (Power) button again to turn off the unit.

Notes: ∙ The IVA-C800 draws minimal current even when its power switch is turned off. If the switched power (ignition) lead of the IVA-C800 is connected directly to the positive (+) post of the vehicle's battery, the battery may be discharged. If this lead is unswitched, it must be disconnected from the battery post should the vehicle be left unused for an extended period of time. An SPST (Single-Pole, Single-Throw) switch (sold separately) can be added to simplify this procedure. Then, you can simply place it in the OFF position when you leave the vehicle. Turn the SPST switch back ON before using the IVA-C800. For connecting the SPST switch, refer to the Installation manual.

∙Some operation of the unit cannot be performed while the vehicle is in motion. In this case, be sure to first stop your vehicle and apply the parking brake, then perform the operation.

28