1

2

English

Basic Operation

Adjusting the Volume/

Treble/Bass/Balance/

Fader

12

Press the rotary encoder repeatedly until the mode you wish to adjust is obtained. Each press changes the modes as follows:

BAS. TRE. BAL. FAD. VOL.

The volume level can be adjusted at any time by just rotating the rotary encoder.

Rotate the rotary encoder to set to the desired sound within 5 seconds after selecting the mode.

Note: If the rotary encoder is not turned or pressed within 5 seconds after selecting the BAS. (Bass), TRE. (Treble), BAL. (Balance), or FAD. (Fader), the unit automatically defaults back to the VOL. (Volume) mode.

1

Muting the Sound

1

Press the MUTE button to switch between the

Mute On and Off modes.

When the MUTE On mode is selected, the volume level instantly decreases.

32

Page 32
Image 32
Alpine IVA-C800 Adjusting the Volume Treble/Bass/Balance Fader, Muting the Sound, → Bas. → Tre. → Bal. → Fad. → Vol