Adjustment procedure for Dolby Surround
Make the adjustments described below in order to reproduce Dolby Digital and DTS sound with greater accuracy.
Adjustment procedure
1 | Speaker setup (page 22) | |
(Turning the speakers to be used on and off and setting their response) | ||
|
Adjusting the speaker levels (page 22)
2 (Adjusting the signal output level to the various speakers)
3 | Mixing bass sound to the rear channel (page 23) |
(Achieving smooth sound in the rear seat by mixing the front audio | |
signals with the rear speaker signals) |
Adjusting the acoustic image (page 24)
4 (Adjusting the acoustic image to achieve a sound as if the centre speaker were directly in front of the listener)
Achieving powerful high volume sound (page 25)
5 (Achieving energetic sound with even greater power, like the sound in a movie theater)
Adjusting the DVD level (page 25)
6 (Adjust the volume (signal level) in the Dolby Digital, Pro Logic II, DTS and PCM modes.)
Storing settings in the memory (page 28)
7 (Storing all the settings and adjustments made on the
NOTE
In case of combining the Automatic adjustments etc.
We recommend to make the Automatic adjustments before the Dolby Surround adjustments.
