Amana ARR6102, ART6112, ART6002, ARR6202 owner manual Range Control, Panel

Range Control	Panel
A		A	A		A
		OfF	[_		OFF
• MED	'	• _WED '	_R	,	MED '
FRONT
A	B	A	A	B	A

ASurface element control knob

Surface element indicator light

C Oven light switch

Use to turn surface elements on and off. Settings:

LO--Use to prepare food at less than boiling temperatures or to simmer.

MED--Use to maintain boiling of larger amounts of food, low temperature frying and to maintain correct pressure in a pressure cooker.

HI--Use to bring food to boiling temperatures. When food is boiling temperature setting should be reduced to MED through HI.

Some ranges have two indicator lights, one for elements on right side and one for elements on left side of range. When either front or rear element is on, corresponding indicator light glows.

Some ranges have one indicator under clock. When any element is on, indicator light glows.

Smoothtop ranges can have one or two indicator lights. After the surface controls are turned off, the appropriate surface indicator light will continue to glow until the surface elements have cooled. The time each light remains on will vary. Do not expect the lights for two different heating areas to go off at the same time even if the elements were turned off simultaneously.

Used to light inside of oven. On some models, light turns on when oven door is opened.

On all models, switch located next to clock, turns oven light on and off without opening door.

D	Range control	Used to control oven functions like baking, broiling, and self-clean. Also controls clock
		and minute timer. (Figure8)

11