Amana ARR6202, ART6112, ART6002, ARR6102 owner manual Oven, Control

OFF

OVEN BROIL WM

PREHEATED550" /	_	350
500	/ 450 / 400

Oven	Control
TIMER	Pad	Selects timer		feature. Timer can be set up to 11 hour		59 seconds.	Timer does not control
		oven operation.
		TIMER pad has light that flashes when timer is being set and glows when timer is counting
		down.
CLOCK	Pad	Press to set clock and turn clock display on and off.
HRS Pads		Increases	or decrease		time by hours.
MIN Pads		Increase	or decrease		time by minutes.
OVEN	Light	Glows when		oven is on. Light flashes after self-clean		cycle turns	off as a reminder	to turn
		temperature		knob to OFF.
LOCKED Light		Glows when		oven door is locked and oven is set for self-cleaning.			After self-clean	cycle,

light flashes. Unlatch oven door and turn temperature knob to OFF.

PREHEATED

Light

Temperature

Knob

Time Display

Other Features

12-hour automatic cancel

Service codes and tones

Glows when oven reaches selected temperature.

Controls oven temperature, self-clean, and broil. Push-to-turn knob prevents accidentally turning oven on.

Shows the time-of-day and timer minutes.

Timer light allows the user to identify timer mode quickly and easily.

As a safety feature, oven control automatically shuts off oven after 12 hours of operation. This feature can be turned on or off.

To allow the oven to operate for more than 12 hours, confirm temperature knob is in OFF position. Then, press and hold the MINS + and - pads for approximately

4 seconds. Display will change from time-of-day, show "OFF", and then return to time-of- day.

To set oven to shut off after 12 hours, confirm temperature knob is in the OFF position. Then, press and hold the MINS + and - pads for approximately 4 seconds. Display will change from time-of-day, show "ON", and then return to time-of-day.

Electronic oven control is equipped with a self diagnostic system. Self diagnostic system alerts you if there is an error or problem in the control. If the range control sounds a series of short, rapid beeps for over 16 seconds and display shows a F-code, record the F-code shown. Some F-codes can be cleared by disconnecting power to the range. If the code

continues to reoccur call an authorized servicer. Disconnect electrical supply to range and contact an authorized servicer.

F2--High Oven Temperature

F3--Temperature Sensor Malfunction

F4--Temperature Sensor Malfunction

14