Oven Rack Placement
Position oven rack before turning oven on.
[WARNIN]
To avoid damaging oven liner or creating fire, do not line I oven bottom or oven racks with foil.
1.Pull rack forward to stop position.
2.Raise front edge of rack and pull until rack is out of oven.
3.Place rack in new rack position.
•Curved edge of rack must be toward rear of oven.
Baking
1.Open oven door to confirm nothing is stored in oven cavity and set racks to proper height.
2.To preheat oven, turn oven temperature knob to desired temperature.
•Oven indicator light glows if knob is set to any position but OFF.
•When oven reaches desired temperature, PREHEATED light glows and oven beeps 6 times.
3.Place food in oven.
•If
4.After cooking time elapses, remove food and turn oven temperature knob to OFF.
=
Oven Rack Placement
Bake Pan Placement
•Keep pans and baking sheets 2 inches from oven walls.
•Stagger pans placed on different racks so one is not directly over the other.
Pan Placement
|
| OFF |
|
OVEN | BROIL |
| WM |
|
|
| J |
CLEAN |
| . 200 | |
|
| ||
L_ |
|
| 250 |
LOCKED |
|
|
|
|
|
| " 300 |
PREHEATED | 550 / | \ | 350 |
|
| ||
i
500 /450 / 400
Temperature Knob
Adjusting Factory Set Baking Temperature
Oven temperature is set at factory. When first using oven, follow recipe times and temperatures. If you think oven is too hot or too cool, temperature can be adjusted. Before adjusting oven baking temperature, test a recipe by using a temperature set higher or lower than the recommended temperature. The baking results should help you to decide how much adjustment is needed.
1.Turn oven temperature knob to OFF.
2.Press and hold HRS + and HRS- pad for approximately 5 seconds.
3.Immediately, press either HRS + or HRS- pad.
•HRS + increases oven temperature by 5°E
•HRS- decreases oven temperature by 5°R
•Oven temperature can be changed up to 35°F. When temperature is adjusted
•After a few seconds control saves new setting and returns to previous display.
16
