14
3. Select temperature by pushing “HI TEMP,” “LO TEMP,” or “PERM PRESS.” The dryer will start, the
light emitting diode (L.E.D.) display will read the temperature cycle selected, and the drying time portion of
the L.E.D. display will read “00” and count upward as time elapses.
NOTE: If the door is opened during a cycle, both the heat and motor will stop. However, the Phase 3
microprocessor controller (computer) will continue to count upwards in time. Continuation of
the cycle will resume only after the door has been closed and any one of the three (3)
temperature selection buttons is again depressed.
4. Once the preprogrammed dryness level and cool down period have been reached or the maximum automatic
time has expired, whichever comes first, the buzzer (tone) will sound, and the L.E.D. display will read
“donE” for 5-seconds, at which time the dryer will shut off.
NOTE: If the Antiwrinkle Program is active (“Grd”), the L.E.D. display will remain reading “donE,”
and the Phase 3 microprocessor controller (computer) will proceed through the Antiwrinkle
Program until the maximum “Guard On Time” has expired or until the door is opened,
whichever comes first. The L.E.D. display will read “FILL” and/or “Amount To Start”
(“AtSt”).
NOTE: If the Antiwrinkle Program is not active (“nGrd”) the L.E.D. display will read “donE” until the
main door is opened, at which time the L.E.D. display will read “FILL” and/or “Amount To
Start.”
C. FREE DRY MODE
1. When turning on power or when no cycle is in progress, the L.E.D. display will read “FILL” and/or
“FrEE.”
2. Select temperature. The dryer will start, the L.E.D. display will read the temperature cycle selected, and
the drying portion of the L.E.D. display will read “00” and count upwards as time elapses.
NOTE: If the door is opened during a cycle, both the heat and motor will stop. However, the Phase 3
microprocessor controller (computer) will continue to count upwards in time. Continuation of
the cycle will resume only after the door has been closed and any one of the three (3)
temperature selection buttons is again depressed.
3. Once the preprogrammed dryness level and cool down period has been reached or the maximum automatic
time has expired, whichever comes first, the buzzer (tone) will sound, and the L.E.D. display will read
“donE” for 5-seconds, at which time the dryer will shut off.
NOTE: If the Antiwrinkle Program is active (“Grd”), the L.E.D. display will remain reading “donE,” and
the Phase 3 microprocessor controller (computer) will proceed through the Antiwrinkle Program
until the maximum “Guard On Time” has expired or until the door is opened, whichever comes
first. The L.E.D. display will read “FILL” and/or “Amount To Start” (“AtSt”).
NOTE: If the Antiwrinkle Program is not active (“nGrd”) the L.E.D. display will read “donE” until the
main door is opened, at which time the L.E.D. display will read “FILL” and/or “Amount To
Start.”