Install Shielding Troughs, Shielding Partitions, and Cable Ladders
Shielding Troughs and Shielding Partitions for overhead wiring along rows
If you ordered APC Shielding Troughs, Shielding Partitions, and Cable Ladders to route overhead wiring for your system, assemble the Shielding Troughs and the Shielding Partitions along the rows of enclosures and assemble the Cable Ladders between rows
| For detailed installation and grounding instructions, see the instruction sheet |
| included with the Shielding Troughs and Shielding Partitions |
See also |
|
Shielding Troughs. There are two types of Shielding Troughs:
•The PDU Wide Shielding Trough is 610mm in length and is not adjustable. The trough sits on top of the PDU and accommodates power cables as they exit the roof of the PDU. The PDU Shielding Trough is two pieces. The power cables sit in between the two pieces when installed on the roof of the PDU.
•The NetShelter Shielding Trough is 610mm in length and is not adjustable. The Shielding Troughs haves an opening in each side through which you route data cables to the Shielding Partitions.
Shielding Trough accessories. APC offers the following accessories for Shielding Troughs:
•Shielding Trough Covers for both
•Shielding Trough End Caps (AR8167BLK) to place on the side of a Shielding Trough at the end of a row. Contact APC for more information.
24 | InfraStruXure |
