American Power Conversion 60kW InfraStruXureTM System manual Start-Up Procedure

Start-Up Procedure

Safety warnings

This section provides instructions on how to perform a system start-up. Do not skip any steps in this procedure.

Only APC Field Service Engineers or qualified, APC-trained personnel may perform a system start-up.

Electrical

Hazard

Before you proceed, ensure that power is off by following the procedure in this section.

Electrical

Hazard

Ensure that all power is off

1. Set the PDU Main Input to OFF.

2. Set the upstream input circuit breaker (utility or UPS) to the OFF or Locked Out position.

InfraStruXure System—Installation and Start-Up 33