MAX-AOM Audio-Only (USB) Module

MAX-AOM Audio-Only (USB) Module

Overview

The MAX-AOM Audio-Only Module (FIG. 2) is a streaming audio playback USB module that distributes up to four stereo outputs (both digital and analog).

The AOM is available either as a single unit (FG 2178-55), or as two units using the optional AOM-EX Expansion Kit (FG 2178-56) that mount side-by-side within a single rack unit. The AOM-EX adds another four audio outputs, to allow up to eight audio-only outputs. Note that the AOM-EX does not include a faceplate.

OUTPUT 1

OUTPUT 2

OUTPUT 3

OUTPUT 4

(rear)

Power Connector

USB connector (to MMS server)

FIG. 2 MAX-AOM Audio-Only Module - rear panel connectors

The MMS-01S, MMS-02S and MMS-02SB servers feature two built-in audio output channels, and support one MAX-AOM (for a maximum total of six audio output channels).

The MMS-04S, MMS-12S and MMS-900 servers support two MAX-AOMs (for a maximum total of eight audio output channels).

Do not use a USB hub with MMS servers or AOM modules.

Product Specifications

MAX-AOM (FG 2178-55) Specifications

Power:

• 5VDC 0.9A external power supply

 

110-240 VAC 50/60 Hz

 

 

AC Current Draw (AMP):

• .09A - Bootup/Power Cycle Peak

 

• .09A - Normal Usage Peak

 

 

Audio Output:

• 4 audio output channels, each with RCA SPDIF digital, analog stereo

 

• Digital audio output: 6-channel Dolby Digital and DTS

 

• Analog audio output: stereo

 

24-bit D/A conversion, 128X over sampling

 

• 48kHz sampling rate

 

• Output level -10dBV nominal

 

• Signal to Noise Ratio 110db A-weighted

 

 

MAX AOM and AVM Modules

3

 

 

Page 7
Image 7
AMX MAX-AVM manual MAX-AOM Audio-Only USB Module, Overview, Product Specifications