Connecting the UPS
Connecting the UPS
Connect Utility and Load
First, connect the UPS with Utility, then plug the loads into the Outlets on the rear of the UPS (FIG. 17). To use the UPS as a master “On/Off” switch, make sure that all of the loads are switched “on”.
These UPS outlets provide battery backup and surge protection to the equipment when Utility voltage is out of window.
NetLinx / MAX Equipment
UPS
Touch Panels
FIG. 17 Plug The Loads Into the UPS
Do not connect a laser printer to the UPS outlets!
| 17 |
|
|
