IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Important Notice
The UPS has its own internal energy source (battery). Should the battery be switched on when no AC power is available, there could be voltage at the output sockets.
Make sure that the AC Utility outlet is correctly grounded.
Do not open the case, as there are no serviceable parts inside. Your warranty will be void.
Please make sure that the input voltage of the UPS matches the supply voltage.
To eliminate any overheating of the UPS, keep all ventilation openings free from obstruction, and do not store "things" on top of the UPS. Keep the UPS 30cm away from the wall.
Make sure the UPS is installed within the proper environment as specified
Do install the UPS in direct sunlight.
Install the UPS indoors as it is not designed for installation outdoors.
Dusty, corrosive and salty environments can do damage to any UPS.
Install the UPS away from objects that give off excessive heat and areas that are excessively wet.
The battery will discharge naturally if the system is unused for any length of time.
It should be recharged every
Do not install the UPS in an environment with sparks, smoke or gas.
Make sure the UPS is completely turned off when moving the UPS from one place to another. It might cause electrical shock if the output is not cut completely.
Storage Instructions
For extended storage through moderate climate, the batteries should be charged for 12 hours every 3 months by plugging the UPS power cord into the wall receptacle and turn on input breaker on front panel.
Repeat this procedure every 2 months under high temperature environment.
| 5 |
|
|
