Operation

3.If the battery voltage is detected lower than set limit, the Battery Replacement mark will blink for 5 times then extinguish to stop self-test procedure. And if battery is detected weak or dead, the Battery Replacement mark will steadily illuminate.

The UPS will remain at “NO” output, if the start-up operation is not proceeded properly even though the Input Power Cord is connected to the wall receptacle.

IMPORTANT - Plug the UPS onto the wall receptacle to charge the UPS for over 8 hours after initial installation.

Store at -15 to +30 °C (+5 to +86 °F), charge the UPS battery every six months.

Store at +30 to +45 °C (+86 to +113 °F), charge the UPS battery every three months.

22

NXA-UPS1500 Uninterruptible Power Supply

Page 26
Image 26
AMX NXA-UPS1500 manual Operation