Welcome | Andis Company P333T-PWR instruction

Running the Device Manager

To run the Device Manager:

1.Open your browser.

2.Enter the URL of the switch in the format http://aaa.bbb.ccc.ddd where aaa.bbb.ccc.ddd is the inband or outband interface IP address of the switch.

-The user name is “root”.

-The default password for read-only access is “root”.

-The default passwords for read-write access is “root”.

Note:

The P330 Device Manager passwords are the same as those of the CLI. If you change the passwords of the CLI then those passwords become active for the Device Manager as well. For further information on the passwords, refer to the Avaya P330 Installation and Configuration User Guide.

The welcome page is displayed.

Figure 7: The Welcome Page

If you have the Java plug-in installed, the Device Manager automatically opens in a new window, shown in Figure 8.

Issue 1 September 2005 29

Image 31

Andis Company P333T-PWR quick start Welcome

Contents

Avaya P333T-PWR Stackable Switch Quick Start for Hardware InstallationPage Contents Page Page Nm 860 nm DBm Nm 1360 nm Nm 1570 nm Preparing Contacts you might need Defining the InstallationBefore you Start Gathering Information Choosing the Installation Site Preparing Installation FilesPreparing Needed Tools Environmental Requirements Condition Acceptable values Power Requirements Tip Building a stack C363T-PWR C364T-PWR Stack without C360 Stack with C360 Switch Stack Master election rules C364T-PWR Page Equipment Unpack the Device Documentation Avaya P330 Documentation and Utilities CD Page Closed hinged end Mount the Device Open hinged end AC input Power Up P333R DC version rear panel DC input optional Establishing a Console Connection Prepare for Configuration Assigning a Stack IP Address Establishing a Telnet Connection Configuring the Switch Avaya P333R Default Settings Basic configurationAssigning the Stack IP Address Default Switch Settings Function Default Setting Default Port Settings Parameter Default Setting Overview Device ManagerSystem Requirements Running the Device Manager Configuring the Device ManagerDevice Manager Commands Order to Use the following command Welcome Installing from the P330 Documentation and Utilities CD Installing the Java Plug-in Install from your Local Web Site Install from the Avaya Web Site Documentation