Andis Company P333T-PWR quick start Configuring the Device Manager, Running the Device Manager

Device Manager

●Sun Microsystems Java plug-in (supplied on the “Documentation and Utilities” CD). Refer to the Release Notes for the exact version of the Java plug-in.

Configuring the Device Manager

You can configure several Device Manager parameters using the CLI. These parameters include the time-out and retries parameters, the location of the Web server that provides the help files for the Device Manager, and the Java plug-in required for running the Device Manager.

Device Manager Commands

The following Device Manager commands are available.

In order to...	Use the following command...
Set the SNMP retries parameter	set snmp retries
Set the SNMP time-out parameter	set snmp time-out
Set the location of the Web server	set web aux-files-url
with the help files and the Java
plug-in
Display the SNMP retries parameter	show snmp retries
Display the SNMP time-out	show snmp time-out
parameter
Display the URL of the Web server	show web aux-files-url
with the help files and the Java
plug-in

Running the Device Manager

Note:

You should assign an inband or out-of-band interface IP address to the switch before beginning this procedure.

28 Quick Start for Hardware Installation: P333T-PWR Stackable Switch