Chapter 3 Functions and Operations
Symbols
Table
Table
Icon
HOLD
dx
T
Symbol
Site Master is in Hold for power conservation. To resume sweeping, press the RUN/HOLD key. After 10 minutes without a key press, the Site Master will automatically activate the power conservation mode.
Integrator Failure
Lock fail indication. Check battery. (If the Site Master fails to lock with a fully charged battery, call your Anritsu Service Center.)
When calibration is performed, the Site Master stores the ambient temper- ature. If the temperature drifts outside the specified range, this indicator will flash. A recalibration at the current temperature is recommended.
Indicates the remaining charge on the battery. The inner white rectangle grows longer as the battery charge depletes.
Indicates internal data processing.
Self Test
At