Using the Path statement
Select the main- and
Path: Main > Set Password > Change Passwords
Main > Your starting point is the main menu.
Set Password > Scroll to and select this option from the main menu.
Change Passwords > Scroll to and select this option from the
Subsequent options are listed and defined under the path statement.
Password entry
The cooling unit has two levels of password protection:
•Device password allows Device Users to change basic and environmental settings.
•Admin password allows all privileges granted for Device Users, and also allows the Administrator to modify settings that control the components in the cooling unit or change advanced options.
When you try to change a setting, the display interface prompts you to enter your Admin password. The default value for both the Device and Admin password is apc (lowercase). To enter your password, use the up or down arrow key to scroll through the available character set. Press the ENTER key to select the current character and move the cursor to the next character position. After selecting the last character of your password, press the ENTER key once more to submit your password.
Once the password is entered, it remains in effect until the period of inactivity exceeds the Password Timeout setting.
See “Timeout” on page 23.
Note: Passwords are
Start the cooling unit
Path: Main >On/Standby
To start the cooling unit, change the setting to On by pressing the ENTER key to toggle from Standby to On. The fans will start.
The cooling unit will run according to the configured settings.
Note: On/Standby only affects the local cooling unit. You must set the On/Standby option for each cooling unit in the cooling group.
Note: To toggle between On and Standby from the scrolling status screens, press the ENTER key three times in rapid succession.
InRow RD 10 kW Air Cooled Operation and Maintenance | 15 |
