SNMPv1

Path: Administration > Network > SNMPv1 > options

Option

Description

 

 

access

Enable SNMPv1 Access: Enables SNMP version 1 as a method of communication with this

 

device.

 

 

access

You can configure up to four access control entries to specify which Network Management

control

Systems (NMSs) have access to this device. The opening page for access control, by default,

 

assigns one entry to each of the four available SNMPv1 communities, but you can edit these

 

settings to apply more than one entry to any community to grant access by several specific IPv4

 

and IPv6 addresses, host names, or IP address masks. To edit the access control settings for a

 

community, click its community name.

 

• If you leave the default access control entry unchanged for a community, that community has

 

access to this device from any location on the network.

 

• If you configure multiple access control entries for one community name, the limit of four

 

entries requires that one or more of the other communities must have no access control entry. If

 

no access control entry is listed for a community, that community has no access to this device.

 

Community Name: The name that an NMS must use to access the community. The maximum

 

length is 15 ASCII characters, and the default community names for the four communities are

 

public, private, public2, and private2.

 

NMS IP/Host Name: The IPv4 or IPv6 address, IP address mask, or host name that controls

 

access by NMSs. A host name or a specific IP address (such as 149.225.12.1) allows access only

by the NMS at that location. IP addresses that contain 255 restrict access as follows:

•149.225.12.255: Access only by an NMS on the 149.225.12 segment.

•149.225.255.255: Access only by an NMS on the 149.225 segment.

•149.255.255.255: Access only by an NMS on the 149 segment.

•0.0.0.0 (the default setting) which can also be expressed as 255.255.255.255: Access by any NMS on any segment.

Access Type: The actions an NMS can perform through the community.

•Read: GETS only, at any time

•Write: GETS at any time, and SETS when no user is logged onto the Web interface or command line interface.

•Write+: GETS and SETS at any time.

•Disable: No GETS or SETS at any time.

Switched Rack PDU User Guide

88

Page 96 Page 98
Page 97
Image 97
APC AP89XX, AP8941 manual SNMPv1
Page 96 Page 98

AP89XX, AP8941 specifications

The APC AP8941 and AP89XX series are advanced power distribution units (PDUs) designed to meet the growing demands of modern data centers and IT environments. These PDUs are well-regarded for their reliability, efficiency, and ease of use, making them integral components for effective power management in critical applications.

One of the standout features of the AP8941 is its capability to provide both local and remote management. Equipped with a web interface, users can monitor power usage, track energy consumption, and gain insights into the performance of connected equipment from virtually anywhere. This remote capability is particularly beneficial for administrators managing multiple sites, as it enables efficient troubleshooting and minimizes downtime.

The AP8941 also supports environmental monitoring by integrating with temperature and humidity sensors. This feature ensures that data centers maintain optimal conditions to protect equipment from overheating or humidity-induced failures, thus enhancing the overall reliability of the power infrastructure.

Another significant aspect of the AP8941 is its ability to distribute power efficiently through its various outlet configurations. The flexible plug-and-play design allows users to customize their power distribution setups for diverse applications, accommodating unique configurations and equipment requirements.

Security is paramount in today’s IT landscape, and the AP89XX series addresses this concern through advanced security features. The units include user authentication and role-based access control, ensuring that only authorized personnel can access critical power management functionalities.

Additionally, the power visualization tools available with the AP8941 enable users to analyze real-time data, identify potential issues, and optimize their power usage. The sleek design and Mounting options make installation straightforward, whether horizontal or vertical, in standard racks or enclosures.

The series supports a variety of power input options and offers robust overload protection, which is essential for preventing damage to both the PDU and connected devices. The combination of management capabilities, security features, and real-time monitoring tools positions the APC AP8941 and AP89XX series as an excellent choice for IT professionals seeking reliable power management solutions in today's data-heavy environments.

In conclusion, the APC AP8941 and AP89XX offer a comprehensive suite of features that cater to the complex needs of data centers. With their focus on efficiency, security, and management capabilities, these PDUs serve as an essential part of modern IT infrastructure, ensuring operational continuity and power reliability.
Top Page Image Contents