APC SCSI-SATA II manual Console serial port, Remote control - secure shell

browser and type the DHCP address: (The DHCP address is dynamic and user may need to check every time after reboot again.) When DHCP service is not available, IS16GL use zero config (Zeroconf) to get an IP address.

E.g., on LCM. IS16GL gets a DHCP address 192.168.10.50 from DHCP server.

192.168.10.50 IS16GL ←

http://192.168.10.50 or

https://192.168.10.50 (https: connection with encrypted Secure Sockets Layer (SSL). Please be aware of the https function is slower than http.)

Click any function at the first time; it will pop up a dialog to authenticate current user.

Login name: admin

Default password: 00000000

Or login with the read-only account which only allows seeing the configuration and cannot change setting.

Login name: user

Default password: 1234

2.8.2Console serial port

Use NULL modem cable to connect console port.

The console setting is baud rate: 115200, 8 bits, 1 stop bit, and no parity.

Terminal type: vt100

Login name: admin

Default password: 00000000

2.8.3Remote control – secure shell

SSH (secure shell) is required for IS16GL to remote login. The SSH client software is available at the following web site:

SSHWinClient WWW: http://www.ssh.com/

Putty WWW: http://www.chiark.greenend.org.uk/

Host name: 192.168.10.50 (Please check your DHCP address for this field.)

Login name: admin

- 19 -