APC SCSI-SATA II manual Info, Reset to default, Config import & export

When upgrading, there is a progress bar running. After finished upgrading, the system must reboot manually.

Notice: When upgrading FW, IS16GL can only accept the newer version and guarantee the compatibility issue which means, if customer changes FW to older version, the VG/UDV/LUN config may be lost.

3.8.2Info

Enter “Info” function will display system type, FW number, CPU type, RAM size, and serial number.

Figure 3.8.2.1

3.8.3Reset to default

Enter “Reset to default” function, it allows user to reset the controller to the factory default setting.

Figure 3.8.3.1

3.8.4Config import & export

Enter “Config import & export” function, it allows user to save system configurable values – export function and to apply all configuration – import function. For the volume config setting, the values are available in export function and not available in import function which can avoid confliction/date-deleting between two subsystems. That says if one controller already has valuable data on the disks and user may forget it and use import function. If the volume setting

- 64 -