APC SCSI-SATA II manual In “/ Volume config / User data volume”, press

2.Click “”.

3.Input a UDV name, choose a VG Name and input a size to the UDV; decide the stripe high, block size, read/write mode and set priority,

finally click “ “.

4.Done. A UDV has been created.

5.Do one more time to create another UDV.

Figure 3.6.7.4

(Figure 3.6.7.4: Create UDVs named “UDV-R5-1” and “UDV-R5-2”, related to “VG-R5”, the size of “UDV-R5-1” is 50GB, the size of “UDV-R5-2” is 64GB. The status of these UDVs are online, write back, high priority with cache volume 120MB. “UDV-R5-2” is initializing about 4%. There is no LUN attached.)

Step 3: Attach LUN to UDV.

There are 2 methods to attach LUN to UDV.

1. In “/ Volume config / User data volume”, press

“”.

2.In “/ Volume config / Logical unit”, press “”. The procedures are as follows:

Figure 3.6.7.5

- 50 -