Apex Digital LAD-703 owner manual Connecting the TV , DVD, VCR, and Cable or Satelite Box

Connecting to a TV using a RF Modulator

Continued

Connection 2

Connecting the TV to the DVD through the Figure 2 Cable or Satelite Box

DVD (Back)

Your TV (Back)

1)Connect the three-terminal composite video cable to the back of your Apex DVD player. This cable has three prongs, one each in yellow, red, and white. The yellow prong will go into the jack labeled "Video Out"; the white prong will go into the jack labeled "Front-L"; the red prong will go into the jack labeled "Front-R".

2)Connect the opposite end of the composite- video cable into the back of the RF modulator. Make sure to match up the colors correctly.

3)Connect a coaxial cable from the "Antenna Out" jack on the back of your Cable or Satellite receiver to the "Antenna" jack on the RF modulator. The coaxial cable is the one-wire, metal-ended type that you screw onto the VCR.

AUDIO OUT		UHF/Antenna IN
COAXIAL
1	L	Coaxial

(L)

(R)

2R

VIDEO OUT

RF-Modulator

TV /Audio Input

Conntection

TV / Video Input	(V)	L	R	V	To TV Antenna
Conntection

(V)

(L)

(R)

Your Cable/Satelite Box

OUT IN

To your Cable/Satelite connection

4)Connect a coaxial cable from the "To TV" jack on the RF modulator to the jack on the back of your TV.

5)Make sure your TV is set to the appropriate channel before using your DVD player. In most cases, this is channel 3 or 4.

Connection 3

Connecting the TV , DVD, VCR, and Cable or Satelite Box

1) Connect the three-terminal composite video

cable to the back of your Apex DVD player. This

Figure 3

(Back)

Your TV (Back)

cable has three prongs, one each in yellow, red,

and white. The yellow prong will go into the jack

labeled "Video Out"; the white prong will go into

the jack labeled "Front-L"; the red prong will go

into the jack labeled "Front-R".

2) Connect the opposite end of the composite-

video cable into the back of the RF modulator.

AUDIO OUT

COAXIAL	L
1
	(L)
	(R)
2	R
VIDEO OUT
(V)	TV / Video Input
	Conntection
	(L)
TV /Audio Input
Conntection

UHF/Antenna IN

Coaxial

RF-Modulator

L R V To TV Antenna

(V)

(R)

Make sure to match up the colors correctly.

3) Connect a coaxial cable from the "Antenna

Out" jack on the back of your cable or satellite

receiver to the "Antenna In" jack on the back of

Your Cable/Satelite Box		Your VCR (Back)
		UHF/Antenna OUT
		Coaxial
OUT	IN	IN
		OUT

your VCR. The coaxial cable is the one-wire,

metal-ended type that you screw onto the VCR.

4) Connect a coaxial cable from the "Antenna

Out" jack on the back of your VCR to the

"Antenna" jack on the RF modulator.

5) Connect a coaxial cable from the "To TV" jack

on the RF modulator to the jack on the back of your TV.

6)Make sure your TV is set to the appropriate channel before using your DVD player. In most cases, this is channel 3 or 4. Also make sure

To your Cable/Satelite connection

that the VCR is set to the appropriate channel, as well. This selector is usually on the back of your VCR. Consult your VCR manual for further information.

AD-703 A P E X D I G I T A L 11