Basic Operations, TV/AUDIO Selection | Apex Digital LAD-703 specification

Basic Operations

TV/AUDIO SELECTION

Continued

Press POWER on the TV and audio system.

1. Press “TV/VIDEO” on the TV, select VIDEO mode (TV).

• Select S-VIDEO mode to connect to S-VIDEO (if available).

TV/VIDEO

2. Select the correct audio input on the receiver.

•Each receiver is different from another, please refer to the manual of the receiver. (e.g., connect the audio output of the DVD to audio input of the receiver.)

DOLBY

Note: This step can be cancelled if you do not connect it to the receiver.

PLAY DISCS

DVD/LD

1.Press the POWER button to turn on the unit.

2.Press to open the disc tray and load a disc with the label side up.

3.Press again to close the disc tray. The unit begins to read the disc.

4.Press to play the disc.

After step 4 is finished:

• PLAY DVD

The TV Screen shows DVD menu and title menu.

• PLAY SUPER-VCD, VCD 2.0

The TV Screen shows the menu, the unit enters PBC status.

• PLAY CD, VCD 1.1

Press		, the unit plays the disc according to the track numbers.
5. Press		to stop playback.

• You have to push this button twice to stop the playback properly.

6. Remove the disc and power off the unit.

AD-703

A P E X

D I G I T A L

17

Image 17

Apex Digital LAD-703 owner manual Basic Operations, TV/AUDIO Selection, Play Discs, Play DVD, Play SUPER-VCD, VCD

Contents

Safety Precautions Important Safety Instructions Should be unplugged, when not in use for a long time NON-USEPERIODS The power cord of the unit Unpacking Introduction Table of Contents Front Panel Identification of Controls DVD Display Other indicators Remote Control Operating with the Remote Control Preparing the Remote Control Connecting the TV to the DVD through Connecting to a TV using a RF Modulator Video cable into the back of the RF modulator Connecting the TV , DVD, VCR, and Cable or Satelite Box Connected to a TV Preparation Before OperationConnections Connected to a Receiver with Dolby DIGITAL/DTS Decoder Connected to AN Ordinary Amplifier Connect to a Receiver with 5.1 Channel Surround Sound Speaker Setup What is VCD? What is MP3 and VCD?What is MP3? TV/AUDIO Selection Basic OperationsPlay Discs Play DVD Volume Control System SettingPause OSD PBC Play PBC Play Back Control DVD Menu PlayExample select home menu Example Press number button 5, the unit plays track Select Disc Select with Number ButtonsExample push 8 to select track Example if you select track 12, press +10 once and button When Playing DVD Audio ModeWhen Playing VCD or CD Play Discs in Various Ways When Playing CD When Playing SUPER-VCD or VCDFast Play Slow Play Repeat Play When Playing SUPER-VCD, VCD, CD Select Subtitles When Playing SUPER-VCDRepeat Some Parts Time Search Select AnglesSearch a title or a chapter Example Search in title Remaining Time Resume Play When Playing DVD, SUPER-VCD, VCDZooming a Picture Picture is enlarged two times Shuffle Play When Playing DVD, SUPER-VCD, VCD, CDProgram Play Digest Play Example You may select To look through track If the track number is more than 9, press to view the next Select Tracks with Number Buttons MP3 OperationsSelect Tracks with Menu Example Select track Other Functions When Creating MP3’S KEY Control KaraokePlay Karaoke Example Select Dolby Digital Setup Function SettingsMenu Setting General Setup TV Type TV DisplayAngle Mark Spdif Output Speaker Setup Center Delay Rear Delay Compression Dolby Digital SetupDual Mono Dynamic RNG Password Mode Password SetupPassword Change Preferences Parental DefaultresetSelect Language Handling Discs Cleaning DiscsStoring Discs Playable Discs DVD Video PLAYER/OUTPUTS/SUPPLIED Accessories SpecificationsSupplied Accessories DVD Video Player Symptom Cause Correction Before Calling Service Personnel Memo Type of Disc HOW to EnjoyDiscs and Output Sounds On Video CD DVD Player Limited Warranty