1. Getting started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis.
Caution!
Always ground yourself to remove any static charge before touching the CPU card. Modern electronic devices are very sensitive to static electric charges. As a safety precaution, use a grounding wrist strap at all times. Place all electronic components in a
1.2 Packing List
Before you begin installing your single board, please make sure that the following materials have been shipped:
z z z z z
z
1 x
1 x Quick Installation Guide for
1 x Audio jacks and USB connector daughter board
1 x
—User’s Manual (this manual in PDF file)
—Ethernet driver and utilities
—VGA drivers and utilities
—Audio drivers and utilities
1 x Cable set includes the followings:
—1 x PS/2 keyboard and mouse Y cable
—1 x IDE HDD cable
—1 x Bracket with one printer port cable (26P/2.0mm) and one serial port cable (10P/2.0mm)
—2 x Serial port cables
—2 x Audio or USB cables
10