3.5.2.9Boot Up NumLock Status Select power on state for NumLock.
Item | Description |
Enabled | Enable NumLock |
Disabled | Disable NumLock |
3.5.2.10 Gate A20 Option
Select if chipset or keyboard controller should control Gate A20.
Item | Description |
Normal | A pin in the keyboard controller controls Gate A20 |
Fast | Lets chipset control Gate A20 |
3.5.2.11 Typematic Rate Setting
Key strokes repeat at a rate determined by the keyboard controller. When enabled, the typematic rate and typematic delay can be selected.
Item | Description |
Enabled | Enable typematic rate/delay setting |
Disabled | Disable typematic rate/delay setting |
3.5.2.12 Typematic Rate (Chars/Sec)
Sets the number of times a second to repeat a key stroke when you hold the key down. The choice: 6, 8, 10, 12, 15, 20, 24, 30.
3.5.2.13 Typematic Rate (Msec)
Sets the delay time after the key is held down before it begins to repeat the keystroke. The choice: 250, 500, 750, 1000.
3.5.2.14 Security Option
Select whether the password is required every time the system boots or only when you enter setup.
| Item |
| Description |
| System |
| The system will not boot and access to Setup will be denied if the correct password is |
|
| not entered at the prompt. | |
|
|
| |
| Setup |
| The system will boot, but access to Setup will be denied if the correct password is not |
|
| entered at the prompt. | |
|
|
|
Note: To disable security, select PASSWORD SETTING at Main Menu and then you will be asked to enter password. Do not type anything and just press <Enter>, it will disable security. Once the security is disabled, the system will boot and you can enter Setup freely.
3.5.2.15 OS Select for DRAM > 64MB
Select the operating system that is running with greater than 64MB of RAM on the system.
Item | Description |
Disable OS for over 64 MB DRAM | |
OS2 | Enable OS for over 64 MB DRAM |
64