User’s Manual
3.5.5.7MODEM Use IRQ
This determines the IRQ in which the MODEM can use.
The choices: NA, 3, 4, 5, 7, 9, 10, 11.
3.5.5.8
Pressing the power button for more than 4 seconds forces the system to enter the
The choices: Delay 4 Sec,
3.5.5.9State After Power Failure
This item controls the system allowing enough time to save its state in memory. After primary power is restored, the system can reestablish its state during power failure recovery and continue operation.
The choices: Auto, On, Off.
3.5.5.10 Wake Up Events
PM Wake up events are I/O events whose occurrence can prevent the system from entering a power saving mode or can awaken the system from such a mode. In effect, the system remains alert for anything which occurs to a device which is configured as On, even when the system is in a power down mode.
3.5.5.10.1VGA
System can be awaked by VGA monitor.
The choices: On, Off.
3.5.5.10.2LPT & COM
System can be awaked by LPT port, COM port or both.
The choices: NONE, LPT, COM, LPT/COM.