If you’re installing Server Diagnostics Mac OS X on a volume, select the volume and choose Mac OS Extended (Journaled).
11Click Partition.
12Choose Disk Utility > Quit Disk Utility, and then choose Mac OS X Installer > Quit Mac OS X Installer.
After you finish setting up volumes, you can install Server Diagnostics EFI or Server
Diagnostics Mac OS X. For information, see the following topics: ÂÂ “Installing Server Diagnostics EFI” on page 13
ÂÂ “Installing Server Diagnostics Mac OS X” on page 14
Installing Server Diagnostics EFI
Before you install Server Diagnostics EFI, make sure your storage device has a volume that has at least 100 MB of available space and that is formatted as
To perform these instructions, you need the Admin Tools disc v10.6 or later included with the server.
If you perform this task to install Server Diagnostics EFI on an internal volume on the server, you need administrator access to the server. If you perform this task to install Server Diagnostics EFI on a portable storage device, you can use any computer that you have administrator access to.
If you want to connect a host computer directly to the server and the host computer doesn’t provide DHCP service on the port used to connect to the server, you must create a file on the server that assigns an IP address to the server. However, if the host computer provides DHCP service, don’t create this file. For information about how to find out if a computer is providing DHCP service, see Network Services Administration at www.apple.com/server/macosx/resources.
To install Server Diagnostics EFI:
1Insert the Admin Tools disc.
2On the server, open AppleServerDiagnosticsEFI.pkg (located in /Diagnostics/ on the disc).
3Follow the onscreen instructions, and at the Select Destination step, choose a volume that has at least 100 MB of available space and doesn’t have Mac OS X Server installed.
4If you’re asked to authenticate, authenticate as a user with administrator privileges.
Chapter 2 Setup and Installation
13
