Apple 3X108 manual Customizing Server Diagnostics EFI Test Settings, To run the test, click Test

Customizing Server Diagnostics EFI Test Settings

You can customize Server Diagnostics test settings by choosing which tests are run, whether to loop tests, and whether to stop or continue testing when an error occurs.

To customize Server Diagnostics EFI test settings:

1In Server Diagnostics EFI, select the test settings you want.

To do this	Do this
Choose which tests are run	Do any of the following:
	ÂÂ	To select a test, select the checkbox next to
		the test.
	ÂÂ	To select a specific test within a category of
		tests, click the disclosure triangle next to the
		category, and then select individual tests.
	ÂÂ To select all tests, click Select All.
	ÂÂ	To remove all tests, click Deselect All.
Loop all selected tests	Do one of the following:
	ÂÂ	To loop selected tests a specific number of
		times, select “Loop # times” and replace # with
		the number of times to loop.
	ÂÂ To run tests once, select “Loop # times” and
		replace # with the number 1.
	ÂÂ	To loop tests for a specific amount of time,
		select “Loop for # hours and # minutes” and
		replace # with number of hours and minutes
		to loop. When the specified time is reached,
		the current loop must complete before the
		tests stop. For example, if one loop of your
		test set takes 2 hours to complete and your
		specified time is 3 hours, Server Diagnostics
		stops testing in 4 hours. (Instead of stopping
		at 3, it waits for the current test set loop to
		complete before stopping.)
Change what to do when an error occurs	In the On Error pop-up menu, do one of the
	following:
	ÂÂ	To stop testing when the first error occurs,
		choose Stop.
	ÂÂ	To continue testing when errors occur, choose
		Continue.

2To run the test, click Test.

Chapter 4    Using Server Diagnostics

29