Bluetooth Tests
Test | Estimated completion time | Description |
Bluetooth USB Interface | 1 second | Verifies USB interface between |
|
| host and Bluetooth. |
|
|
|
MAC Address Verification | 1 second | Verifies MAC address isn’t all FFs |
|
| or 00s. |
|
|
|
Bluetooth Power Cycle | 10 seconds | Verifies USB interface between |
|
| host and Bluetooth after turning |
|
| Bluetooth power off and then |
|
| turning Bluetooth power on. |
|
|
|
Ethernet Controller Tests
Data loop tests can add to network traffic. Consider disconnecting from the network before running data loop tests.
Test | Estimated completion time | Description |
MAC Address Verification | 1 second | Verifies MAC address isn’t all FFs |
|
| or 00s. |
|
|
|
MAC Loopback | 25 seconds | Verifies that there’s no data |
|
| mismatch between sent and |
|
| received data while looping |
|
| within the MAC (a sublayer of |
|
| the datalink layer in the ISO |
|
| network reference model). |
|
|
|
PHY 1000 Loopback | 25 seconds per port | Verifies that there’s no data |
|
| mismatch between sent and |
|
| received data while looping |
|
| within the physical transport |
|
| medium (PHY) at 1000 Mbps. |
|
|
|
PHY Jumbo Packet Loopback | 25 seconds per port | Verifies that there’s no data |
|
| mismatch between sent and |
|
| received jumbo packet data |
|
| while looping within the |
|
| physical transport medium |
|
| (PHY) at the the highest |
|
| supported speed. |
|
|
|
Appendix Server Diagnostics Test Reference
45
