8Shut down your computer.

9Start up your computer from disk 1 from your set of system software disks or the CD-ROM disc that contains system software.

See “Starting Up From a Floppy Disk” or “Starting Up From a CD-ROM Disc” in the section “Initializing a Hard Disk” earlier in this chapter.

The Installer’s Welcome screen may appear or you may have to double-click the System Software Installer icon to open the Installer program.

10Click OK.

The Easy Install dialog box appears.

Disk on which system software will be installed

To install the software on a different disk, you click here.

The dialog box shown here is an example. The dialog box on your screen may be slightly different.

You click here to install the software you need.

11Make sure that the hard disk named in the box is the one on which you want to install system software.

If it isn’t, click Switch Disk until the correct disk name appears.

12Click Install.

13Follow the instructions that appear on the screen.

If you’re installing system software from floppy disks, you see messages asking you to insert different disks.

104

Chapter 6

Page 104
Image 104
Apple 8200 appendix Easy Install dialog box appears, Click OK