8Put the ball and the ring back in place.

Your mouse should roll smoothly across your mouse pad or desk. If it doesn’t, repeat these instructions carefully.

Locking and unlocking the mouse

Some mouse devices can be locked so that the ball can’t be removed. A locking mouse has a small hole on the plastic ring.

To lock the mouse, follow these steps:

1 Insert a straightened paper clip into the hole on the plastic ring.

Insert a straightened paper clip into this hole.

(The hole may be located here on your mouse.)

2 Press down on the paper clip while you turn the ring clockwise.

Turn the ring a very short distance, until it stops. When the recessed area on the ring is not lined up with the recessed area surrounding the ring, the mouse is locked.

Recessed area on ring

Recessed area surrounding ring

The mouse ring is locked when the recessed area on the ring does not line up with the recessed area surrounding the ring.

Health, Safety, and Maintenance Tips

143

Page 155
Image 155
Apple 8500 manual Locking and unlocking the mouse, Put the ball and the ring back in place