To set up your network configuration, open the AppleTalk control panel to choose the physical network interface you are using. (The AppleTalk control panel also contains zone information—a default zone is chosen for you.) If you plan to use TCP/IP on your Power Macintosh, you also need to choose settings in the TCP/IP control panel. You can set up your connection in two ways: manually, by entering a static Internet address, or automatically by using a network service to connect with a dynamic Internet address. Refer to the “Networking & Communications” topic of Macintosh Guide, available in the Guide (h) menu for more information on setting up network configurations.

If you’re using a static Internet address, you’ll need the following information before configuring your system (your network administrator or Internet access provider can provide this information):

mInternet (IP) address: for example, 192.3.232.55

mDomain name and domain name server address: A domain connects an Internet address to a name for your site, for example, apple.com. Enter your Domain name or type a period (.).

mGateway address: This address provides the path the information will take through the network at your site to reach the Internet.

mSubnet mask: A subnet mask further defines the location of your machine. You don’t need to change the default unless instructed to do so by your network administrator.

If you’re using a server on the network that will be issuing you an Internet address using a technique called bootstrapping, then you need to decide what protocol you will use: BOOTP (BOOTstrap Protocol), or DHCP (Dynamic Host Configuration Protocol). Your network administrator will tell you which to choose.

If, after configuring your AppleTalk and TCP/IP control panels, you see an error message such as, “Unable to locate host,” or “Could not create a socket,” your software is unable to reach the Internet. This indicates a problem in the TCP/IP configuration. Contact your network administrator for additional assistance.

Connecting Additional Equipment

65

Page 77
Image 77
Apple 8500 manual Connecting Additional Equipment