Using the CD as your startup device | Apple LC 575 manual

Using the CD as your startup device

The procedure for starting from the CD Install Me First disc varies depending on the condition of the system software on your hard disk. To find out which procedure to use, you must turn on your Macintosh.

If you see a blinking question mark on your screen

The blinking question mark means your Macintosh is unable to find usable system software on your hard disk.

SImportant: Your computer may be trying to restart from a CD-ROM disc other than CD Install Me First. Press the Open/Close button on the front of the computer to open the tray, and remove the CD-ROM disc. Push the tray in, or press the Open/Close button, to close the tray. Restart your computer. If you still see the blinking question mark, follow the instructions below. S

1.Press the Open/Close button of the CD-ROM drive to open the CD-ROM tray.

2.Place the CD Install Me First disc into the tray, with the disc label facing up.

Make sure the disc is lying flat in the tray.

3.Push the tray in, or press the Open/Close button, to close the tray.

Your Macintosh recognizes the CD as a startup disk, and in a few seconds the desktop below appears.

Although some parts of your screen may look different, the instructions in this section are correct.

34 Installing System Software

Image 40

Apple LC 575 manual Using the CD as your startup device, If you see a blinking question mark on your screen

Contents

Getting Started Apple Computer, Inc Contents Installing System Software Iv Contents Communications regulation information Move the computer farther away from the television or radio Exposure. s Class 1 label Setting Up Setting Up Socket end of the power cordPlugging in the computer Connecting the mouse and keyboard ADB port Computer. The top of the switch is marked with an Power key Problems starting up? Safety instructions Health-related information about computer use Musculoskeletal discomfort Eye fatigue Arranging your office Shoulders relaxed Forearms and hands in a straight line Avoiding fatigueForearms level or tilted up slightly What’s next? Learning the Basics Use your hand to scoot the mouse along the table By the way Macintosh HD stands for Macintosh hard disk Put the tip of the arrow inside this picture Now your screen should look like the following illustration Turning the computer on and off Shutting down the computer with a menu command Press the Power key marked with the P icon on the keyboardTurning on the computer Click Shut Down Use these buttons to Change the volume Computer’s sound On adjusting the keyboard heightGuide for information on Optional You can use the screws Your Computer at a Glance Special Features Adjusting the sound Using the Sound control panel Sound control buttons Using the Screen control panel Adjusting the screenScreen control buttons Disabling the buttons on the front of your computer Saving energy Using the built-in microphone Installing an expansion card To install an expansion card Continues Slide the logic board back Replace the back panel of the computer Using memory efficiently Using a RAM disk for temporary storage Connecting to a network Using a modem Starting up your computer from an external hard disk Installing System Software Installing System Software Using the CD as your startup device If you see a blinking question mark on your screen If you see the Macintosh desktop On the desktop, click Install System Reinstalling system softwareWelcome dialog box that appears, click OK Custom installations Installer dialog box, click Install Click a button to select the disk image you want to copy On the desktop, click the Disk Images tabClick Disk Images Dialog box that appears, click Make a Copy Copying the Macintosh Basics tour Open the Applications folder Apple Publishing System