Slide the logic board back | Apple LC 575 guide

10. Align the card over the processor-direct expansion slot.

Align the card over this slot.

11.Press down on the card until the connector is solidly in place.

Don’t force the card. If you meet resistance, pull the card out and try again. To see if the card is properly connected, lift it gently. If it resists and stays in place, it’s connected.

12.Slide the logic board back in.

Push on the edge of the logic board until it is firmly in place.

13.If there is a connector on the card that you just installed (for example, if you are installing an Apple IIe Card), remove the access cover on the back panel you removed earlier.

Pinch together the plastic tabs on the access cover to remove it and pop it out. With the access cover off, you can use the port on the card you just installed.

28 Special Features

Image 34

Apple LC 575 manual Slide the logic board back

Contents

Getting Started Apple Computer, Inc Contents Installing System Software Iv Contents Communications regulation information Move the computer farther away from the television or radio Exposure. s Class 1 label Setting Up Setting Up Socket end of the power cordPlugging in the computer Connecting the mouse and keyboard ADB port Computer. The top of the switch is marked with an Power key Problems starting up? Safety instructions Health-related information about computer use Musculoskeletal discomfort Eye fatigue Arranging your office Shoulders relaxed Forearms and hands in a straight line Avoiding fatigueForearms level or tilted up slightly What’s next? Learning the Basics Use your hand to scoot the mouse along the table By the way Macintosh HD stands for Macintosh hard disk Put the tip of the arrow inside this picture Now your screen should look like the following illustration Turning the computer on and off Turning on the computer Shutting down the computer with a menu commandPress the Power key marked with the P icon on the keyboard Click Shut Down Guide for information on Use these buttons to Change the volume Computer’s soundOn adjusting the keyboard height Optional You can use the screws Your Computer at a Glance Special Features Adjusting the sound Using the Sound control panel Sound control buttons Using the Screen control panel Adjusting the screenScreen control buttons Disabling the buttons on the front of your computer Saving energy Using the built-in microphone Installing an expansion card To install an expansion card Continues Slide the logic board back Replace the back panel of the computer Using memory efficiently Using a RAM disk for temporary storage Connecting to a network Using a modem Starting up your computer from an external hard disk Installing System Software Installing System Software Using the CD as your startup device If you see a blinking question mark on your screen If you see the Macintosh desktop On the desktop, click Install System Reinstalling system softwareWelcome dialog box that appears, click OK Custom installations Installer dialog box, click Install Click a button to select the disk image you want to copy On the desktop, click the Disk Images tabClick Disk Images Dialog box that appears, click Make a Copy Copying the Macintosh Basics tour Open the Applications folder Apple Publishing System