Fujitsu N800 Troubleshooting and tips, Power-on indicator remains dark, Power supply overloaded

7 Troubleshooting and tips

VCAUTION!

Observe the safety information in the manual “Safety, Warranty and Ergonomics” and in the chapter “Installing the server” on page 19 and the chapter “System expansions” when connecting or disconnecting cables.

If a fault occurs, try to correct it as described

–in this chapter,

–in the documentation for the connected devices,

–in the help system of the individual programs.

If you fail to correct the problem, proceed as follows:

ÊMake a note of the steps and the circumstances that led to the fault. Also make a note of any error messages displayed.

ÊSwitch off the server.

ÊContact your customer service.

7.1Power-on indicator remains dark

The power-on indicator remains dark after you have switched on your device:

Power cable incorrectly connected

ÊMake sure that the power cable is correctly connected to the server and to the grounded insulated socket.

Power supply overloaded

ÊPull the power plug of the server out of the insulated socket.

ÊWait a few seconds and plug the power plug into the insulated socket again.

ÊSwitch on your server.

U41243-J-Z156-1-76 75