Server switches itself off | Troubleshooting and tips |
7.2Server switches itself off
Server management has detected an error
ÊIn the ServerView program, check the error list or the Error Log file with the SCU utility and attempt to eliminate the error.
7.3Screen remains dark
Monitor is switched off
ÊSwitch on your monitor.
Screen has been blanked
ÊPress any key on the keyboard. or
ÊDeactivate screen blanking (screen saver). Enter the appropriate password.
Brightness control is set to dark
ÊSet the brightness control to light. For detailed information, please refer to the operating manual supplied with your monitor.
Power cable or monitor cable not connected
ÊSwitch off the monitor and the server.
ÊCheck whether the power cable is properly connected to the monitor and to the grounded insulated socket.
ÊCheck whether the monitor cable is properly connected to the server and monitor (if it is plugged in with a connector). If a separate graphics card is installed in the server, the monitor cable must be connected to the port of this graphic card.
ÊSwitch on the monitor and the server.
76 |
