Fujitsu N800 manual Removing a hard disk drive

SCSI hard disk drives System expansions

VCAUTION!

Keep the dummy module for future use. If the hard disk drive is removed again and not replaced with a new drive, then the dummy module must be reinstalled due to cooling, the applicable EMC regulations (regula- tions on electromagnetic compatibility) and fire protection.

1

2

Figure 21: Removing a hard disk drive

ÊLook at the orange LEDs to determine which drive is bad.

ÊSwing up the handle of the hard disk drive slide-in module completely (1) and pull the slide-in module out (2).

Installing occurs in reverse order:

ÊPush the hard disk drive slide-in module into the bay as far as possible and then swing down the handle of the hard disk drive slide-in module completely to enable the locking mechanism to engage.

92 U41243-J-Z156-1-76