Fujitsu N800 manual Indicators for the internal SCSI drives, Indicators for the power supplies

Preparation for use and operation Controls and indicators

4.1.2Indicators for the internal SCSI drives

The internal SCSI drives are located on the front of the server. The status of each SCSI drive is indicated by two LEDs (see table 24 on page 91).

4.1.3Controls and indicators for the CD-ROM drive

The CD-ROM drive is located in the drive cage in the bay for externally acces- sible drives on the front of the server. The CD-ROM drive is equipped with the following controls and indicators:

Open/close button:	When pressed briefly (<1 second), this button opens
	or closes the CD-ROM tray.
Power-on indicator:	Lights up green when the CD-ROM drive is in use.
Volume control:	Adjusts the volume of the headphones or speakers.

4.1.4Controls and indicators for the floppy disk drive

The floppy disk drive is located above the CD-ROM drive. The floppy disk drive is equipped with the following controls and indicators:

Power-on indicator:	Lights up green when the floppy disk drive is in use.
Eject button:	Pressing briefly on this button ejects the floppy disk.

4.1.5Indicators for the power supplies

The power supplies can be accessed from the back of the server. The status of each power supply is indicated by three LEDs (see table 25 on page 95).

4.1.6Indicators for the hot-plug PCI slots

Each hot-plug PCI slot is equipped with two pairs of LEDs (hot-plug indicators) which indicate the current status of the slot (see table 26 on page 100). One pair of LEDs is visible on the back of the server from the outside. The other pair is located inside the server in near the slot with the PCI hot-plug locking mechanism.

U41243-J-Z156-1-76 35