2 Important notes
2.1Notes on safety
In this section you will find information that you must note when using the storage subsystem.
This device complies with the relevant safety standards for IT equipment, including electronic office machines, intended for use in the office environment.
IObserve the safety instructions in the “Safety, Warranty and Ergonomics” manual and in the documentation for the connected PRIMERGY system.
If you have any questions relating to setting up and operating your system in the environment where you intend to use it, please consult our service organization.
VCAUTION!
●The actions described in these instructions should only be performed by technicians, service personnel or technical specialists. Equipment repairs should only be performed by qualified staff. Any failure to observe the guidelines in this manual could expose the user to considerable risks (electric shock, fire hazards) and could also damage the equipment. Note that any unauthorized opening of the device will result in the invalidation of the warranty and exclusion from all liability.
●Transport the device in its original packaging or in other suitable packaging which will protect it against shock or impact.
●Read the notes on environmental conditions in section “Technical data” on page 9 before setting up and operating the device.
●If the device is brought in from a cold environment, condensation may form both inside and on the outside of the machine.
Wait until the device has acclimatized to room temperature and is absolutely dry before starting it up. Material damage may be caused to the device if this requirement is not observed.
●Check that the rated voltage specified on the device's ID plate is the same as the local line voltage.
11 |
