Opening/closing the server | System expansions |
8.1.4Removing/mounting the top cover
I It is not necessary to remove the PCI bus |
Figure 18: Removing the top cover
ÊTurn off all peripheral devices connected to the server.
ÊShut the server down, turn the server off and disconnect it from the line voltage.
V CAUTION!
Turning off the server does not disconnect it from the line voltage. In order to fully disconnect from the line voltage, you must pull out the power plug.
ÊRemove the two holding screws.
ÊPush the cover uniformly ca. 2.5 cm in the direction of the arrow to disengage the row of tabs attaching the cover to the chassis and remove it.
Mounting is performed in reverse order.
88 |
