Fujitsu N800 manual Exit Menu, BIOS Setup, Menu item, Option, Description, Disabled

Configuration software and utilities		BIOS Setup
Menu item	Option	Description
Pause	Disabled	Starts IRTOS manually. When you
During	Enabled	hear three beeps, POST has stopped
POST		(press any key to continue).
Table 21: Boot Menu options		(continued)

5.3.8Exit Menu

The following menu items are available on the Server menu. Select an item using the up and down arrows. Press Ú to select this option and follow the instructions.

Menu item	Description
Exit Saving Changes	Exits Setup and saves the changes in CMOS-RAM.
Exit Discarding	Exits Setup without saving the changes to CMOS-
Changes	RAM.
Load Setup Defaults	Loads the Setup default values.
Load Custom	Loads the user-defined default values.
Defaults
Save Custom	Saves changes to the user-defined default values
Defaults	(normally, PhoenixBios reads the Setup settings from
	CMOS-RAM. However, if CMOS-RAM fails, BIOS uses
	user-defined values if such values have been specified.
	If not, BIOS uses the factory defaults).
Discard Changes	Discards the changes and loads the previous settings
	from CMOS-RAM.
Save Changes	Saves the changes to CMOS-RAM.

Table 22: Exit Menu items

U41243-J-Z156-1-76 67