System expansions | RemoteView storage medium |
8.8.1Configuring the RemoteView storage medium
So that RemoteView can be started automatically later, enter the parameters of the storage medium in the BIOS setup. To do this, proceed as follows:
ÊRestart the server.
ÊPress function key F2 when the message Press <F2> to enter SETUP appears on the screen. You will find notes on this procedure in section “BIOS Setup” on page 47.
ÊSelect in the Main menu of the BIOS setup the Primary Master and the Primary Slave submenu (see section 5.3.3 on page 51).
For both, Primary Master and for Primary Slave the value for Type has to be set to auto as default
I With this default settings the IDE ChipDISK is not „visible“ as drive in the standard administration environment (e. g. windows explorer).
ÊStart RemoteView via the ServerView restart option Boot Diagnostic System.
ÊEnd RemoteView with menu item Boot Original OS.
The server then boots the standard operating system. You can find how to operate RemoteView in the manual for RemoteView.
IShould the RemoteView software not yet be installed on the IDE storage medium, then install the software as described in the manual for
RemoteView.
115 |
