Fujitsu N800 manual Bios and firmware update, Example

Utilities Configuration software and utilities

5.4.2.2BIOS and firmware update

You find the Software for the BIOS and firmware update on the Fujitsu-Siemens Computers-PC Software Pool:

BMC	BaseBoard Management Controller
FRU/SDR	FRU- and Sensor data
FPC	Front Panel Controller
BIOS with User Binaries	System BIOS and FSC User Binaries
HSC	FSC P-Bay with two Hot-Swap Controller

IBefore You start an update pay attention to the notes attached to the corresponding BIOS and firmware version.

For generate flash floppy disks the software must be downloaded by using the utility Flash-BIOS-Download.

For updating observe the given flash sequence:

Example:

1.BMC V.26

Not necessity of user entries.

2.FRU/SDR V1.01

ÊSelect

TTj rbp VV

and eventually the installed CPU frequency with

TTNFF kf VV

3.FPC V.18

Not necessity of user entries.

4.BIOS V.20 with User Binaries V1.03 The prompt appears often:

TTapVV

ÊConfirm each time with Return Ú.

5.HSC V.6

Not necessity of user entries.

70 U41243-J-Z156-1-76