Fujitsu N800 manual Boot Menu, BIOS Setup, Menu item, Option, Description

BIOS Setup Configuration software and utilities

5.3.7Boot Menu

Menu item	Option	Description
Floppy	Disabled	Accelerates the boot process.
Check
	Enabled	Checks the floppy disk drive type on
		boot.
Boot Device	1. Removable Devices	Selects the search order for the types
Priority		of boot devices.
	2. Hard Drive
		The operating system assigns drive
	3. ATAPI CD-ROM Drive
		letters to the devices in the order
		shown.
		Use the Ê and Ë arrows to select a
		device. Press [+] or {-}to move the
		device up or down in the list to change
		the sequence (press [Esc] to exit this
		menu).
Removable	1. Legacy Floppy Devices	Use the Ê and Ë arrows to select a
Devices		device. Press [+] or {-}to move the
		device up or down in the list to change
		the sequence (press [Esc] to exit this
		menu).
Hard Drive	Bootable Ad-In Card	The system attempts to boot the
		operating system from the first disk
		drive on the list. If it does not find an
		operating system, the system tries the
		next drive on the list until it finds an
		operating system.
		Use the Ê and Ë arrows to select a
		device. Press [+] or {-}to move the
		device up or down in the list (press
		[Esc] to exit this menu).
Maximum	1	Selects the maximum number of I2O
Number of	4	drives that will be assigned to a DOS
I2O Drives		drive letter.
Message	1, 2, 4, 8, 10, 50, 100,	All time-out values will be multiplied by
Time-out	1000	this number.
Multiplier

Table 21: Boot Menu options

66 U41243-J-Z156-1-76