Fujitsu N800 manual Connecting the server to line voltage, RemoteView RTDS, SEMAN and the CAN bus

Installing the server Connecting the server to line voltage

RemoteView (RTDS), SEMAN and the CAN bus

The update of the firmware and the testing and diagnosis of the storage subsystem can only be performed via the CAN bus and using SEMAN (included on the ServerStart CD) or the optional RemoteView (remote test and diagnostics system). Refer to the RemoteView manual for more information (see “Related publications” on page 125).

3.6Connecting the server to line voltage

The server is equipped with a modular, hot-plug power supply consisting of a maximum of three power supply units. A redundant power supply can be set up with a third power supply unit. If a defect occurs in one unit, the other unit ensures unimpaired further operation. The defective unit can be replaced during operation.

The power supply units automatically adjust to a voltage range from 100V to 120V or 200V to 240V.

ÊPlug the server’s power cord into the insulated socket on the server (see figure 13 on page 36) and into a free socket on the connector strip on the rack (see the technical manual for the rack).

U41243-J-Z156-1-76 31