Fujitsu N800 manual System Management submenu, Enable, BIOS Setup, Menu item, Option, Description

BIOS Setup Configuration software and utilities

5.3.6.1System Management submenu

Menu item	Option	Description
Firmware SMIs	Disabled	Disables all firmware SMI sources.
	Enabled
System Event Logging	Disabled	Logs critical system events.
	Enabled
Clear Event Log	Disabled	Deletes the system event log.
	Enabled
Memory Scrubbing	Disabled	The chipset will deliver corrected
		data but will not update the memory
		contents.
	Enabled	The chipset will correct the memory
		contents when a correctable error is
		detected.
AERR Enable	Enable	The host bus Address Parity Error
		signal (AERR) is enabled for each
		processor that supports it.
	Disable	AERR is ignored.
Assert NMI on BERR	Disabled	Generates an NMI (the Firmware
	Enabled	SMIs option must be enabled to
		assert an NMI).
Assert NMI on PERR	Disabled	Generates an NMI (the SERR option
	Enabled	is required).
Assert NMI on SERR	Disabled	Generates an NMI.
	Enabled
Enable Host Bus Error	Disabled	Allows host single- and multiple-bit
	Enabled	errors.
FPC Error Check	Disabled	If enabled, BIOS verifies that it can
	Enabled	communicate with the Front Panel
		Controller (FPC).
HSC Error Check	Disabled	If enabled, BIOS verifies that it can
	Enabled	communicate with the Hot Swap
		Controller (HSC).
Server Management		Selects the System Management Infor-
Information		mation submenu.

Table 18: Server Management options

64 U41243-J-Z156-1-76