Additional Procedures | Battery Verification - 2 | |
|
|
|
Positive Probe
| 1 Set the voltmeter to the |
| 10 volts DC scale. |
| 2 Hold the positive probe |
Negative Probe | of the voltmeter to the |
positive end of the | |
| battery (marked “+” |
| on the logic board) and |
| the negative probe to the |
| negative end of the |
| battery. |
| 3 If the battery voltage is |
| below 3.2 volts, replace |
| the battery. Refer to |
| “Battery Replacement” |
| in this chapter. |
