Command Specifications / Spécifications des commandes / Befehlsspezifikationen / Opdrachtspecificaties
Power / Alimentation / Betriebsbereitschaft / Stroom
g Change the
d Ändern des
Example / Exemple / Beispiel / Voorbeeld
g Command/response sequence to bring the main zone out of standby:
f Séquence commande/réponse pour désactiver le mode veille de la zone principale :
d
n Opdracht- en responsreeks om de hoofdzone uit standby te halen:
Command: 0x50 0x43 0x5f 0x2a 0x31 0x31 0x0d
Response: 0x41 0x56 0x5f 0x2a 0x50 0x31 0x31 0x0d
Display Brightness / Luminosité de l’affichage /
Helligkeit des Displays / Displayhelderheid
g Change the brightness of the display on the front panel of the AVR350.
f Modifiez la luminosité de l’affichage du panneau avant du système AVR350.
d Ändern der Helligkeit des Displays an der Gerätevorderseite des AVR350. n De helderheid van het display op de voorkant van de AVR350 wijzigen.
Example / Exemple / Beispiel / Voorbeeld
g Command/response sequence to change the brightness of the display to ‘off’:
f Séquence commande/réponse pour désactiver la luminosité de l’affichage :
d
n Opdracht- en responsreeks om de helderheid van het display op 'uit' te zetten:
Command: 0x50 0x43 0x5f 0x2b 0x31 0x30 0x0d
Response: 0x41 0x56 0x5f 0x2b 0x50 0x31 0x30 0x0d
Open a menu / Ouverture d’un menu /
Aufrufen eines Menüs / Een menu openen
g Open one of the menus of the AVR350.
If the
f Ouvrez l’un des menus du système AVR350.
Si le menu
d Aufrufen eines der Menüs des AVR350.
Falls das
n Een van de menu's van de AVR350 openen.
Als het
Example / Exemple / Beispiel / Voorbeeld
g Command/response sequence to open the ‘Trim’ menu:
f Séquence commande/réponse pour ouvrir le menu Trim :
d
Command: 0x50 0x43 0x5f 0x2c 0x31 0x33 0x0d
Response: 0x41 0x56 0x5f 0x2c 0x50 0x31 0x33 0x0d
Command:
Byte: | Description: |
|
|
CC | ‘*’ (0x2a) (Command code) |
|
|
P1 | Zone: |
| ‘1’ (0x31) – Zone 1 |
| ‘2’ (0x32) – Zone 2 |
|
|
P2 | Request: |
| ‘0’ (0x30) – Enter |
| ‘1’ (0x31) – Enter |
| ‘2’ (0x32) – Enter system |
| state (both Zone 1 and 2 |
| power amplifiers off) |
| ‘9’ (0x39) – Request power state |
|
|
Response: | |
|
|
Byte: | Description: |
|
|
RC | ‘*’ (0x2a) (Reply Code) |
|
|
AC | Answer code |
|
|
P1 | Zone: |
| ‘1’ (0x31) – Zone 1 |
| ‘2’ (0x32) – Zone 2 |
|
|
P2 | Response: |
| ‘0’ (0x30) – Zone is in |
| ‘1’ (0x31) – Zone is on |
|
|
Command:
Byte: Description:
CC ‘+’ (0x2b) (Command code)
P1 Zone:
‘1’ (0x31) – Zone 1
P2 Request:
‘0’ (0x30) – Front panel off
‘1’ (0x31) – Front panel dimmed ‘2’ (0x32) – Front panel bright ‘9’ (0x39) – Request brightness
Response:
Byte: | Description: | |
|
| |
RC | ‘+’ (0x2b) (Reply Code) | |
|
| |
AC | Answer code | |
|
|
|
P1 | ‘1’ (0x31) | – Zone 1 |
|
| |
P2 | Response: | |
| ‘0’ (0x30) | – Front panel is off |
| ‘1’ (0x31) | – Front panel is dimmed |
| ‘2’ (0x32) | – Front panel is bright |
|
|
|
Command:
Byte: Description:
CC ‘,’ (0x2c) (Command code)
P1 Zone:
‘1’ (0x31) – Zone 1
P2 Request:
‘1’ (0x31) – Open the Main Menu ‘2’ (0x32) – Open the
‘4’ (0x34) – Open the Sub Trim Menu ‘5’ (0x35) – Open the Lip Sync Menu ‘9’ (0x39) – Request the open menu state
Response:
Byte: | Description: |
|
|
|
|
RC | ‘,’ (0x2c) (Reply Code) |
|
|
|
|
AC | Answer code |
|
|
|
|
P1 | ‘1’ (0x31) – Zone 1 |
|
|
|
|
P2 | Response: |
|
| ‘0’ (0x30) – No menu is open |
|
| or: the current open menu |
|
| is returned, as left. | AVR350 |
|
| |
|
| |
|
|
|
English